Small, sleek and very powerful,
the ActiveEye Wireless Motion Sensor
supercharges any home and lifestyle by removing
the need for switches and buttons. Now with
adjustable time delay and more enhancements!
Here's What You Get!
The ActiveEye Wireless Motion Sensor (MS16A) is
small, sleek and very powerful! They supercharge
any home and lifestyle by removing the need for
switches and buttons. Great for outdoors!
Weather Resistant! Now with Simple-to-Use,
Adjustable time delay and more enhanced
performance features!
- Super Small: Only 2.5" by 2.5"
- X10.com price: only
$29.99
- No Risk: 30-Day money back
guarantee
- Warranty: 12-month limited warranty
The ActiveEye Motion Sensor works anytime,
day or night, indoors or out! Automatically turn
on an area of light, all controlled by X10
modules.
- Fully weather-proof! The ActiveEye
Motion Sensor is the perfect solution for
monitoring indoors and out!
- Simple-to-Use, Adjustable time delay!
Set the delay from 1 minute to 255 minutes!
Now you can have the flexibility to have your
lights, appliances, or even Macros turn off
just 60 seconds after you leave the room or
turn off the lights! Simply pull the tiny cap
off the top of the motion sensor (see above
photo), then turn the adjustable switch for
how long you want the delay before it turns
off! (1 min to 60 minutes max). For example if
you set it at the half way point; When motion
is detected, your light would come on then
turn off 30 minutes later.
- Easily disable the dawn/dusk feature so
it will work 24 hours/day! Sensor is set
to detect motion at all times as the default.
Then, you can easily enable the dawn/dusk
feature so lights only come on when its dark
and turn off when there's light.
How it works ...
The ActiveEye Motion Sensor sends wireless Radio
Frequency (RF) signals to an
X10 Transceiver or any X10 security system
base receiver. The Transceiver receives the
signals from the Motion Sensor and passes them
onto your house wiring.
These signals are then received by X10
lamp,
appliance, or
wall switch modules to control lights (or
appliances) around the home.
If you set the ActiveEye Motion Sensor to a
unique code (House Code A and Unit Code 1), then
walk into the room where the ActiveEye Motion
Sensor is located, a lamp module set to "A1"
will turn on. As long as you keep moving, the
light will stay on, and when you stop moving,
the light turns off after the amount of time you
select.
The signals transmitted onto your house wiring
can also be received by the two-way Computer
Interface (CM11A) to initiate macros. The
Computer Interface then performs a sequence of
events that you've set it up to do.
Standard Features:
-
Up to 20' ft range
-
Passive infrared technology
-
Motion Sensor is 2.5 x 2.5 inches
-
Requires 2 AAA batteries (not included)
Special Features:
-
You can easily disable the dawn/dusk feature
so it will work 24 hours/day! No need to cover
photo-cell with black tape.
-
It has adjustable time delay! You can set the
delay from 1 minute to 255 minutes! Now you
can have the flexibility to have your lights,
appliances, or even Macros turn off just 60
seconds after you leave the room (The old
version had only 1 setting of 6 minutes).
-
Weather resistant case protects the sensor
from the elements.
-
Locking screw prevents easy removal of
batteries.
Enhances ActiveHome features & functions:
Normally the ActiveEye Motion Sensor will turn
on an X10 module set to its' code, however when
used with the CM11A 2-way Computer Interface
(included with ActiveHome) the ActiveEye Motion
Sensor becomes much more powerful. Instead of
turning on a module set to A1, you can set A1 to
initiate a macro that performs a sequence of
events. For example you enter the room, the
table lamp can turn on and dim to 70%, and the
stereo can turn off 30 minutes later.
Built in photocell works like a watchful eye and
will turn lights on and off at dusk and sunrise.
This will save you energy as it only detects
motion in the dark.
|
